SI-1318 Clamp Connection Sanitary Pressure Sensor

Sanitary Pressure Sensor is a type of pressure sensing device that is specifically designed for use in sanitary environments. Such as food processing plants, pharmaceutical manufacturing facilities, and hospitals. SI-1318 Clamp Connection Sanitary Pressure Sensor is equipped with a clamp connection, which allows for easy installation and maintenance without the need to disassemble the entire system.

The sensor is typically made from high-grade stainless steel and other corrosion-resistant materials to withstand the harsh conditions found in these types of environments. It is also designed to meet various industry standards, such as 3-A and EHEDG, to ensure that it is safe and hygienic for use in these applications. The Clamp Connection Sanitary Pressure Sensor is an important tool for monitoring and controlling pressure levels in sanitary environments.

Features of Clamp Connection Sanitary Pressure Sensor

  • Wide measuring range;
  • Hygienic structure, no dead angle, anti-clogging;
  • Protection class IP65;
  • Various output signal forms, adjustable and displayed on site;
  • Reverse polarity protection and instantaneous overcurrent and overvoltage protection, in line with EMI protection requirements;
  • Clean flat isolation diaphragm, in line with 3A hygiene standard;
  • Adopt diffused silicon pressure sensor, no pressure hole, no cavity planar structure;
  • Various signal output forms, voltage, current, frequency signals, etc.;
  • High precision, high strength, hygienic, anti-fouling;

SI-1318 Clamp Connection Sanitary Pressure Sensor Specifications

Item Specification
Measuring range Relative pressure: maximum 0 ~ 7MPa, minimum 0 ~ 5KPa, customized up to 100MPa
Absolute pressure: Maximum 060MPa; Minimum 020KPa
Negative relative pressure: -1KPa-0.1MPa
Accuracy class ±0.5%F.S
Temperature effect Tk≤±0.02%FS/K
Stability Better than 0.1%FS/year
Location effect Mounting position does not affect zero point
Permissible temperature Medium temperature: -2080, -40200
Ambient temperature: -3080
Storage temperature: -3080
Protection class IP64, IP65
Adjustment range Zero adjustment range ±5%
Full scale adjustment range ±20%
Power supply 1632VDC
Output signal 420mA DC (analog, two-wire system)
15V DC (analog, three-wire system)
Wiring lead-out method It can be drawn out from any outlet according to the needs. It is recommended to use a minimum of φ7.5 industrial cable as the lead for sealing. The lead-out connector is a general cable connector M12×1.5, and the end without the lead is sealed with an end cover
Pressure interface Stainless steel clamp type; thread M27×1.5, G1/2, G3/4, NPT1/2,

Order Guide

SI-1318 Clamp Connection Sanitary Pressure Sensor
Code Pressure Range
(0~X)KPa -100kPa…0-0.01…100MPa
Code Output Signal
B1 4-20mA
B3 0-10v
B4 0-5V
B5 1-5V
Code Process Connection
K1 2 inch clamp connection
K2 2.5 inch clamp connection
P Specify thread size
Code Electrical connections
C1 Hirschman joint
C2 Cable output
C3 Aviation connector
Code Structure Material
Diaphragm Interface Shell
M1 316L Stainless steel Stainless steel
M3 Tantalum customize customize
M4 Hastelloy C customize customize
Code Additional functions
G Gauge pressure (default)
A Absolute pressure
S Sealed gauge pressure
D1 Local display
Y2 Blue protective shell
T High temperature -XX℃
SI-1318 (0-40)MPa B1  K1 C2 M1 G D1

Learn More About Sanitary Pressure Sensor

Sanitary pressure sensors use pressure sensors with stainless steel or ceramic isolating diaphragms as signal measuring elements. And through computer automatic testing, the zero point and sensitivity temperature compensation of wide temperature range are carried out by laser trimming technology.

The amplifier circuit is located in the stainless steel housing and converts the sensor signal into a standard output signal. The entire product has passed strict testing and aging screening of components and semi-finished products, and its performance is stable and reliable.

Sanitary pressure sensors are often designed with clamp connections, which allow for easy installation and maintenance. Clamp connections use a clamp and gasket to seal the connection between the sensor and the process. This type of connection is preferred in clean environments because it asy allows for e disassembly and reassembly without the need for tools.

A Hart pressure transmitter is a type of industrial process control instrument that is used to measure and transmit the pressure of a process fluid, such as oil, water, or gas.

One of the key advantages of using a Hart pressure transmitter is the use of the HART protocol, which allows for digital communication between the transmitter and a control system. This enables the transmission of both analog and digital signals over a single pair of wires, which simplifies the wiring and reduces the chances of errors.

Additionally, the HART protocol allows for the transmitter to be calibrated and configured remotely, which can save time and reduce maintenance costs. Overall, the use of the HART protocol in a Hart pressure transmitter makes it a reliable and cost-effective choice for many industrial applications.

There are 4 main types of pressure transmitters: differential pressure, gauge pressure, absolute pressure, and vacuum pressure.

Differential pressure transmitters measure the difference in pressure between two points;
Gauge pressure transmitters measure the pressure relative to atmospheric pressure;
Absolute pressure transmitters measure the pressure relative to a perfect vacuum;
And vacuum pressure transmitters measure the pressure in a vacuum or low-pressure system.

Each type of pressure transmitter is designed to measure a specific range of pressure and is used in a variety of applications, such as industrial process control, HVAC systems, and fluid power systems.

DPT tansmitter is the abbreviation of differential pressure transmitter. A differential pressure transmitter is a type of instrument used to measure the difference in pressure between two points in a system.

It consists of a sensor that measures the pressure at one point, and a reference point that is used to compare the measured pressure to a known value. The transmitter sends a signal to a display or control system, which can be used to monitor and control the pressure within the system.

Differential pressure transmitters are commonly used in a variety of applications, including HVAC systems, process control, and fluid flow measurement.

A pressure sensor is a device that is used to measure pressure. It can be used to detect a variety of different types of pressure, including atmospheric pressure, gauge pressure, differential pressure, and more. There are many different types of pressure sensors available, including piezoresistive sensors, capacitive sensors, optical sensors, and more. Each type of pressure sensor works in a slightly different way, but they all operate on the principle of detecting changes in pressure and converting that pressure into an electrical signal that can be measured and interpreted by a computer or other electronic device.

If you cannot find an answer to your question in our Clamp Connection Sanitary Pressure Sensor, you can always contact us and we will be with you shortly.

More Featured Pressure Sensors

Sino-Inst is a manufacturer of Clamp connection sanitary pressure sensor. We supply more than 10 types of sanitary pressure sensors.

There are many types of pressure sensors, such as resistance strain gauge pressure sensors, semiconductor strain gauge pressure sensors, Silicon piezoresistive pressure sensors, inductive pressure sensors, capacitive pressure sensors, resonant pressure sensors and capacitive sensors.

A clamp connection sanitary pressure sensor is a type of pressure sensor that is designed specifically for use in sanitary environments, such as food processing plants, breweries, and pharmaceutical manufacturing facilities.

Sanitary pressure sensors are typically made from materials that are resistant to corrosion and easy to clean. Such as stainless steel or titanium, and they feature a clamp connection design that allows for quick and easy installation without the need for welding or other complex fabrication processes.

The primary application of clamp connection sanitary pressure sensors is to monitor the pressure of liquids and gases in piping systems, enabling operators to maintain safe and efficient process conditions and prevent equipment failure.

Sino-Inst has provided pressure measurement solutions to customers for many years. Our pressure sensor, made in China. Widely exported to the United States, Britain, Germany, South Africa, Norway and other countries.

If you need Clamp connection sanitary pressure sensor, but have technical questions, please feel free to contact our sales engineers.

    Request For Quote



    SI-1318 Clamp Connection Sanitary Pressure Sensor

    Sanitary Pressure Sensor is a type of pressure sensing device that is specifically designed for use in sanitary environments. Such as food processing plants, pharmaceutical manufacturing facilities, and hospitals. SI-1318 Clamp Connection Sanitary Pressure Sensor is equipped with a clamp connection, which allows for easy installation and maintenance without the need to disassemble the entire system.

    Product SKU: SI-1318 Clamp Connection Sanitary Pressure Sensor

    Product Brand: Sino-Inst

    Product Currency: USD

    Product Price: 185

    Price Valid Until: 2029-09-09

    Product In-Stock: InStock

    Editor's Rating:
    5

    Leave a Comment