Sino-Inst supplies 10,000 psi pressure transducers, 1/4 NPT threaded mounting and a 1–5 VDC output. It is suitable for measuring the pressure of gases and liquids. 10,000 psi is equivalent to 68.95 MPa or 689.5 Bar. Benefits Technical Specifications Measuring range 0–10,000 psi Accuracy 0.1% FS, 0.25% FS, 0.5% FS (optional) Output 4–20 mA, 0/1–5/10 … Read more
Oxygen cleaning is a specialized cleaning procedure for special-purpose pressure transmitters, also known as oil-free. For example, oxygen pressure transmitters must undergo rigorous oxygen-grade cleaning to ensure the sensor is clean and free of oil, corrosion, scale, particles, and other impurities. This completely eliminates the potential risk of oxygen combustion or explosion caused by oil … Read more
The JPT201 CAN-bus output piezoresistive pressure transmitter features adjustable zero-point and full-scale output. It utilizes a highly stable and reliable pressure sensor combined with high-performance, application-specific transmitter circuitry, ensuring overall stability and reliability. It is widely used for fluid pressure monitoring and control in industries such as petroleum, chemicals, electric power, vehicle testing, and defense. … Read more
The 9051 multivariable transmitter is suitable for use with annubar, deltabar, verabar, balanced, V-cone, orifice plate, nozzle, venturi, and other throttling devices provided by our company. It can be battery powered, requiring no external power supply for on-site display. It features fully isolated output, strong anti-interference capabilities, and shields against all interference. It can output … Read more
Flush diaphragm pressure sensors engineered for tunnel boring machines. Measures earth pressure, grouting pressure and slurry in EPB shields — built to replace imported brands at a fraction of the cost. Key Features－Engineered for the Harshest Underground Conditions Tunnel boring machines operate in extreme environments — abrasive soil, corrosive slurry, constant vibration and high pressure. … Read more
The PMC133 Ceramic Capacitive Pressure Sensor uses a dry-type ceramic capacitive sensor as its pressure sensing element. Encased in a full stainless steel housing, it offers excellent media compatibility, stable and reliable performance, strong overload capacity, and high accuracy. The sensor components are made of Al2O3, which has strong corrosion resistance and is suitable for … Read more
The Sanitary Pressure Transducer features a unique hygienic process connection, specifically designed for measurements in food processing, pharmaceutical, and clean-in-place systems where hygiene is critical. Sino-Inst’s Sanitary Pressure Transducer utilizes proven thin-film sensor technology and a hygienic isolation seal. Both the wetted parts and the diaphragm are made of 316L stainless steel and laser-welded for … Read more
High Frequency Pressure Sensor is also called high frequency dynamic pressure transmitter. The natural frequency of the sensor can reach 1-2MHz, and it can measure high-frequency pressure changes in the bandwidth range of 0-200KHz, and the pressure range is from -100KPa~0~10Kpa…100MPa. The SI-90 dynamic high-frequency pressure sensor is a high-speed measurement response pressure sensing device, … Read more
Mechanical Adjustable Pressure Switch can convert physical quantities such as air pressure or hydraulic pressure into an electrical switch signal. It has a built-in diaphragm or piston-type sensing element with a wide measuring range. The setting can be adjusted arbitrarily within 0-40MPa. Sino-Inst’s Mechanical Adjustable Pressure Switch can be used to measure: water, oil, and … Read more
The SI-3151 series capacitive pressure transmitter is a high-performance intelligent pressure transmitter. It can measure both absolute and gauge pressure. Supports 4-20mA, HART, RS485 and other signal outputs. The built-in linear and temperature compensation circuits enable the transmitter to achieve high accuracy of 0.5% FS and high stability. It also offers exceptional overload resistance. Advantages … Read more