Partially filled pipe flow meter is a flow meter specially used to measure non-full pipe fluid flow, also called Non-full pipe flowmeter. Our Sino-Inst electromagnetic partially filled pipe flow meter uses the velocity-area method to continuously measure fluid flow in partially filled pipes (such as semi-flow sewer pipes and large-flow pipes without overflow weirs).
Partially filled pipe flow meter can measure and display instantaneous flow, flow rate, cumulative flow and other data. It is especially suitable for the needs of metering places such as municipal rainwater, wastewater, sewage discharge and irrigation water pipes.
Features of Partially filled pipe flow meter
Technical Parameters
| Applicable medium: | The medium cannot fill the pipe, or partially fill the pipe |
| Lining type: | Polyfluorobutanil, PTFE |
| Electrode type: | 316L, HaB, HaC, titanium, tantalum, platinum-iridium alloy, stainless steel tungsten carbide |
| Nominal diameter: | Circular pipe DN200-DN6000mm; rectangular pipe: width ≤ 6m ≤ 6m |
| Measurement accuracy: | Water level ±2mm; flow rate ±1.0%; flow rate ±1.5% |
| Measuring range: | Flow velocity 0.05-10m/s |
| Conductivity of measured medium: | ≥20s/cm |
| Measured medium temperature: | -25-80℃ |
| Pressure range: | 1.6MPa |
| Protection level: | Sensor 1P65/1P67/IP68 (optional), converter 1P65 |
| Display: | Large screen, backlight LCD display, which can simultaneously display instantaneous flow, flow rate, cumulative flow, liquid level and other measurement data |
| Current output signal: | 4-20mA/DC (load resistance ≤500Ω) |
| Pulse output signal: | 1-2000HZ |
| Digital communication interface: | RS232、RS485 optional |
| Wireless data transmission: | GSM and GPRS optional |
| Power supply: | 220VAC or 12VDC, 24VDC |
Electromagnetic Partially Filled Pipe Flow Meter Working principle and application
Electromagnetic Partially Filled Pipe Flow Meter is composed of an electromagnetic flow rate sensor, a liquid level sensor and a flow indicator.
Continuously measures the flow rate and level of fluids in pipes. Users only need to input the inner diameter of a circular pipe or the width of a square pipe, and the Electromagnetic Partially Filled Pipe Flow Meter will automatically calculate the flow rate in the pipe. And automatically displays the instantaneous flow, flow velocity, cumulative flow and other measurement parameters in the pipeline.
Partially Filled Pipe Flow Meter can be used to measure the total flow of open, partially filled pipes (round steel pipes, rectangular square pipes or other special-shaped pipes);
Can be used for continuous metering of municipal rainwater, wastewater, sewage discharge and irrigation water pipes, etc.
It can be used for continuous measurement of municipal engineering precipitation, sewage, industrial wastewater and irrigation water pipelines.
More Flow Measurement Solutions
- Top 3 Flow Meters for PVC Pipes
- Top 4 Types of Pipeline Flow Meters-DN6~DN1000~DN6000
- Flow Measurement 101
- Steam Pressure Sensor/transducer for Industrial Steam Measurement
- What Is Solvent Flow Meter? Industrial Selection Guide
- What Is a BTU Meter? | BTU Energy Measurement Systems
- What Is the Difference Between Mass Flow Meter and Magnetic Flow Meter?
- Target Flow Meter Advantages And Disadvantages and Featured Applications
- Magnetic Flow Meter Troubleshooting| Manufacturer’s Guide
- What Is Turbine Flow Meter K Factor?
- Ultra Low-Micro Liquid Flow Measurement
- Installation Instructions for Electromagnetic Flowmeters
- Water Flow Measurement Solution-Ultrasonic Flowmeter
- Slurry & Sludge Flow Measurement
- High-Pressure Flow Meters
- Cooling Water Flow Measurement
- Wastewater flow meter
- Water Flow Meter Types
Electromagnetic Partially Filled Pipe Flow Meter is a new type of flow measurement instrument that calculates the flow rate of the flow meter by measuring the flow rate and liquid level of the fluid in the medium. Compared with traditional mechanical or liquid level flowmeters, non-full tube electromagnetic flowmeters have the advantages of high accuracy, strong reliability, and wide adaptability, so they are widely used in industrial production and other fields.
In appearance, the Electromagnetic Partially Filled Pipe Flow Meter is no different from an ordinary electromagnetic flow meter. It also has the advantages of not being affected by fluid parameters, no moving parts, no flow obstructions, minimal pressure loss, no measurement hysteresis, linear output and wide range.
The measurement channel of the Electromagnetic Partially Filled Pipe Flow Meter is a smooth straight pipe without obstruction, so it is particularly suitable for measuring liquid-solid two-phase fluids containing solid particles, such as pulp, mud, sewage, etc. When installing a non-full pipe flow meter, the water level will not be raised upstream and therefore there will be no head loss.
We at Sino-Inst supply Electromagnetic Partially Filled Pipe Flow Meter in various sizes. If you need to purchase Electromagnetic Partially Filled Pipe Flow Meter or have related technical questions, please feel free to contact us!
Electromagnetic Partially Filled Pipe Flow Meter - Sino-Inst
Partially filled pipe flow meter is a flow meter specially used to measure non-full pipe fluid flow, also called Non-full pipe flowmeter. Our Sino-Inst electromagnetic partially filled pipe flow meter uses the velocity-area method to continuously measure fluid flow in partially filled pipes (such as semi-flow sewer pipes and large-flow pipes without overflow weirs).
Product SKU: Electromagnetic Partially Filled Pipe Flow Meter
Product Brand: Sino-Inst
Product Currency: USD
Product Price: 1450.00
Price Valid Until: 2029-09-09
Product In-Stock: PreOrder
5