DC-M100 Digital Flow Controller/Flow Meter is mainly used for measuring and controlling gas flow with a range of 30SLM-100SLM. The maximum pressure resistance of the product can reach 10Mp. It adopts a new sensor manufacturing process. It has the advantages of fast response speed, high accuracy, stable flow control, high-pressure resistance, and good linearity. It is suitable for most dry and clean gases (and a few corrosive gases).
Features
- Fast response speed
- Pressure resistance 3Mpa or 10MPa
- Strong anti-interference
- Wide pressure range
- Accurate flow control
- Long data transmission distance
DC-M100 Digital Flow Controller/Flow Meter technical parameters
| Product model: | DC-M100C / DC-M100M |
| Flow range (N2): | 30SLM—100SLM |
| Control range: | 2%-100%/2%-100% |
| Accuracy: | ≤+1.0%F.S |
| Linearity: | ≤±0.5%F.S |
| Repeatability: | ≤+0.2%F.S |
| Valve type: | Normally closed valve |
| Response time: | ≤2sec |
| Maximum pressure resistance: | 50Bar |
| Communication signal: | 0-5V/4-20mA/RS485 |
| Power supply method: | 24V DC |
| Leakage rate: | 1×10-9atm.cc/sec He |
| Connector size: | 3mm, 6mm, 10mm, 1/4. 3/8 etc. |
Note:
- Thermal gas mass flow controllers and thermal gas mass flow meters are usually calibrated with nitrogen (N2) before leaving the factory.
- Mass flow unit:
SCCM (standard milliliters per minute)
SLM (standard liters per minute) - Standard conditions:
Temperature: -293.15K (20C)
Pressure: -101325Pa (760mmHg)
F.S (Full Scale) means full scale
Applications
The DC-M100 series of thermal gas mass flow controller/flow meter is suitable for nearly 100 gases such as hydrogen, ammonia, oxygen, carbon monoxide, carbon dioxide, rare gases, etc.
Application industries:
Vacuum coating equipment, semiconductor process equipment, chemical, and chemical experimental equipment, food science and engineering equipment, energy and environmental protection equipment, various analytical instruments and equipment, surface treatment, vacuum metallurgy,y and material technology, laboratory equipment of universities and research institutes.
Thermal Gas Mass Flow Controller Vs Mass Flow Meter
Thermal gas mass flow controller is referred to as MFC and thermal gas mass flow meter is referred to as MFM. MFC is a device with the function of controlling gas mass flow, while MFM is a device without the function of controlling gas mass flow.
At present, the most widely used is a thermal gas mass flow controller, namely MFC. Two pairs of heaters are placed in the induction tube with a smaller diameter and controlled at the same temperature. When the fluid flows, the gas brings part of the heat from the upstream to the downstream, and the downstream heater obtains the heat from the top to increase the temperature. At this time, the flow rate is measured by using the principle that the temperature difference between the upper and lower heaters is proportional to the mass flow of the fluid.
The core selling point of the flow control controller is the flow control accuracy. The advanced heat diffusion technology can instantly and accurately measure the thermal gas flow. Even if the flow is adjusted in a wide range, it can maintain extremely high accuracy, making your equipment more stable and reliable.
Fast response speed means that when the flow needs to be adjusted, the thermal gas flow control controller can respond quickly and achieve precise control. The signal transmission distance means that this thermal gas meteor control controller has excellent transmission performance. It can ensure that the signal is stably and safely sent to the required place, allowing you to easily achieve remote control.
Sino-Inst’s thermal gas mass flow controllers and mass flow meters can be used for most gases such as C3H6, CO, Ar, CO2, Air, O2, N2, He, H2, N2O, SF6, CH4, C3H8, C4H10, etc.
More Gas flow measurement and control solutions
- Liquid Mass Flow Meters And Its Significance
- Gas Mass Flow Meters: Applications, Benefits, And Top Manufacturers
- Types Of Mass Flow Meters And Different Measurement Techniques
- Bulk Flow Meter for Solids | Applications and Benefits
- A Comparative Analysis Of Vertical And Horizontal Flow Meters
- LPG Gas Flow Meters With Some Prominent Manufacturers And Suppliers
- Grease And Lube Flow Meters
- Frame Of Flow Meters: Stainless Steel And PTFE Flow Meters
- Sewer Flow Meters and Their Importance in Sewer Monitoring
DC-M100 digital communication medium and large flow specifications thermal gas mass flow controller/mass flow meter has various communication methods. Compatible with: 0-5V, 4-20mA, RS485 communication mode, one-key switching communication signal, simple and convenient operation.
Sino-Inst’s DC-M100 digital communication medium and large flow specifications thermal gas mass flow controller/mass flow meter is widely used in SUTR magnetron sputtering table, plasma etching, petrochemical, university laboratories, scientific research units, aerospace, photovoltaic industry, semiconductor industry, vacuum coating industry.
If you need to purchase Digital Flow Controller/Flow Meter, or have related technical questions, please feel free to contact us.
DC-M100 Digital Flow Controller/Flow Meter - Sino-Inst
DC-M100 Digital Flow Controller/Flow Meter is mainly used for measuring and controlling gas flow with a range of 30SLM-100SLM. The maximum pressure resistance of the product can reach 10Mp. It adopts a new sensor manufacturing process. It has the advantages of fast response speed, high accuracy, stable flow control, high-pressure resistance, and good linearity. It is suitable for most dry and clean gases (and a few corrosive gases).
Product SKU: DC-M100 Digital Flow Controller/Flow Meter
Product Brand: Sino-Inst
Product In-Stock: PreOrder
5