Kim Guo

Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects. Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.

CL1-32 Single Flange-Shaft Static Torque Sensor

by

Single flange-shaft static torque sensor is suitable for static torque detection or torque detection with a rotation angle less than 360 degrees. It is widely used in static torque test systems such as testing machines, torque wrenches, steering gear electric actuators, valves, and transmission static load torque hydraulics. Features CL1-32 Single Flange-Shaft Static Torque Sensor … Read more

Metal Tube Rotameter: Working Principle and Applications

by

In the arena of flow measurement, metal tube rotameters hold a salient position for their durability, precision, and suitability for difficult environments. Whether you’re in the process industry, water management, or petrochemicals, knowing these devices can heighten your flow measurement abilities. This post dives into the workings, components, benefits, limitations, and application preface of metal … Read more

Rotameters: Excellent Choice for Flow Measurement in Various Gases

by

A rotameter is a device designed to measure the flow rate of fluid volume over time within a closed tube. It has a range of applications, including chemical injection, dosing, and tank blanketing. Also known as variable area flow meters, rotameters are used to measure liquid or gas volumetric flow rates as they pass through … Read more

High Accuracy Flow Meters: A Key To Precision In Flow Measurement

by

Industrial applications starting from oil refineries to vending machines require precision measurements of temperature, pressure, and flow to control complex and simple processes. Within the food industry, for example, the accurate control of flow when filling bottles and cans can directly influence profits. Likewise, custody transfer applications, such as the exchange of raw and refined … Read more

Guide for High Pressure Flow Meters – Industrial Liquid & Gas Measurement

by

When it comes to high-pressure applications, choosing the right flow meter is necessary for checking accuracy, reliability, and safety. High Pressure Flow Meters are perfect when measuring the flow of fluids under high pressures, such as in hydraulic testing. It is also perfect for chemical injection systems, as it withstands pressures up to 6.3MPA~42MPA and … Read more

CL1-22 Flange to Key Static Torque transducer

by

CL1-22 Flange to Key Static Torque Transducer Technical Parameters Range 50,100, 200,300, 500,1000-10000Nm Output 1.5mV/V±10%F.S. Accuracy ±0.1，±0.2%FS. Zero temperature effect ±0.05%F.S. Full temperature effect ±0.05%F.S. Compensated temperature range -10~60℃ Operating temperature range -20~75℃ Supply voltage 5-10VDC Input resistance 350±20Ω Output resistance 350±10Ω Response frequency 100μS Insulation resistance ≥2000MΩ/100VDC Safety overload 150%F.S Ultimate overload 200%F.S. Cable … Read more

CL1-17 Shaft-Type Reaction Torque Transducer

by

CL1-17 shaft-type reaction torque transducer is widely used in static torque test systems such as testing machines, torque wrenches, steering gears, bearings, electric actuators, valves, hydraulics, etc. It is favored by users due to its excellent stability, high measurement accuracy and extremely high cost performance. It is suitable for high-range torque measurement, and the range … Read more

CL1-12 Shaft-to-Shaft Reaction Torque Sensor

by

CL1-12 Shaft-to-Shaft Reaction Torque Sensor is suitable for small-range torque testing machines, torque wrenches, valves, mixers, etc., with a rotation torque less than 360 degrees. CL1-12 Shaft-to-Shaft Reaction Torque Sensor Technical Parameters Range: 0～0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5Nm Frequency: 100μS Output: 0.1-0.2Nm … 0.6 mV/V±10%F.S.0.3-0.8Nm … 0.8 mV/V±10%F.S.1-3Nm …1.3mV/V±10%F.S. Insulation resistance: ≥5000MΩ/ … Read more

CL1-209 Hex-Drive Rotary Torque Sensor

by

CL1-209 Hex-Drive Rotary Torque Sensor Technical Parameters Range 0-5,10,18Nm Output 1.5mV/V±10%F.S. Accuracy ±0.1，±0.2%F.S. Zero temperature effect ±0.03%F.S. Full temperature effect ±0.03%F.S. Compensated temperature range -10~60℃ Operating temperature range -20~75℃ Supply voltage 5-10VDC Input resistance 350±20Ω Output resistance 350±10Ω Response frequency 100μS Green resistance ≥2000MΩ/100VDC Safety overload 150%F.S Ultimate overload 200%F. S. Cable size Φ5×3m Material … Read more

CL1-208 Non-Contact Hex-Drive Rotary Torque Sensor – Encoder Available

by

CL1-208 Non-Contact Hex-Drive Rotary Torque Sensor Technical Parameters Range 0-3,5,10Nm Output 1.5mV/V, ±10%F.S. Accuracy ±0.1，±0.2%F.S. Zero temperature effect ±0.03%FS. Full temperature effect ±0.03%F.S. Compensated temperature range -10~60℃ Operating temperature range -20~75℃ Supply voltage 5-10VDC Input resistance 350±20Ω Output resistance 350±10Ω Response frequency 100μS Green resistance ≥2000MΩ/100VDC Safety overload 150%F.S Ultimate overload 200%F. S. Cable size … Read more