Name: CL1-105 Dynamic Torque Sensor - With Base - Sino-Inst
Brand: Sino-Inst
SKU: CL1-105 Dynamic Torque Sensor - With Base
Availability: InStock

CL1-105 Dynamic Torque Sensor - With Base

Non-contact type
Range 5-5000Nm
Stainless steel shaft
Maximum speed 15000RPM
With speed output
With panel display of torque/speed/power

RFQ

CL1-105 Dynamic Torque Sensor Technical Parameters

Range	5, 10, 20,30,50, 100-5000 Nm
Accuracy	±0.1， ±0.2%FS	Supply voltage	12~24VDC
Zero-point temperature effect	±0.02%FS	Supply current	Less than 100mA
Full-scale temperature effect	±0.02%FS	Electrical connection	8-Pin
Compensated temperature range	-10-60℃	Overload protection	200%FS
Operating temperature range	-20~75℃	Material	Shaft material 17-4PH stainless steel, housing is aluminum
Torque output	10±5kHz(5V amplitude), 0-±5VDC, 0-±10VDC, 0-5-10VDC, 4-12-20mA, 0-5V, 0-10V, 4-20mA, RS485, RS232, CAN, etc.
Options
Rotation speed measurement	60 pulses/circle 4-20mA, 0-5VDC, 0-10VDC, RS485, RS232, CAN, etc.

Dimensions

Model	Cap(Nm）	A	B	C	D	E	G	OH	h	J	K	M	H1	H2	H3	H4	Key (bhl*n)
CL1-105A	5-100	175	111	3.5	2	30	80	18	14.5	6.5	83	100	10	53.5	88.5	15	6622*1
CL1-105B	200-500	198	114	3	7	35	84	28	24	6.5	97	114	10	61	103.5	15	8730*1
CL1-105C	1K-2K	288	134	5	7	70	94	45	34	9	142	175	18	89	151.5	10	14960*2
CL1-105D	3K-5K	355	141	4	7	100	100	75	60	11	181	220	20	110.5	190.5	10	201293*2

Torque sensor installation

There are two main ways to install a torque sensor: base support installation and suspension installation. The following will explain these two installation methods and precautions in detail:

Base support installation

Features: Base support installation refers to the installation of the torque sensor on a foundation with a supporting structure, which is usually called a base or support frame. This installation method ensures that the sensor will not be suspended in the drive system, providing better stability.

Installation steps:

Choose a suitable foundation: Make sure that the power equipment, sensor and load equipment are all installed on a stable foundation to reduce the impact of vibration on the measurement.
Consider parallelism and angular errors: The parallelism and angular errors at both ends of the sensor need to be considered when installing the base support. This usually requires full coupling (i.e. rigid coupling) or double flexible coupling at both ends of the sensor to ensure good coaxiality.
Installing couplers: Install couplers (such as elastic pin couplings or rigid couplings) at both ends of the sensor. To ensure good coaxiality between the axis of the power equipment and the load equipment and the axis of the sensor.
Adjust coaxially: Adjust the distance between the axis of the power equipment and the load equipment relative to the reference plane. Make their axis coaxially less than the specified value (such as Φ0.05mm or less).
Fixed installation: Finally, fix the power equipment and the load equipment on the reference plane. And make sure that the position of the torque sensor also meets the requirements.

Suspension installation

Features: Suspension installation means that the torque sensor has no additional support, but is directly installed between the two half-couplings of the drive system.

Installation steps:

Choose a suitable foundation: Similarly, make sure that the power equipment and the load equipment are installed on a stable foundation.
Install the coupler: In this installation method, usually only the adjustment of parallel misalignment needs to be considered because the angular displacement can be compensated by the suspended sensor. Therefore, only the coupler needs to be installed at both ends of the sensor.
Adjust parallelism: Adjust the parallelism of the axis of the power equipment and the load equipment to meet the specified requirements.
Fixed installation: After fixing the power equipment and the load equipment, place the torque sensor between the two half-couplings.

General Precautions

Installation direction: The torque sensor can be installed horizontally or vertically.
Reduce vibration: Make sure that all equipment is installed on a stable foundation to reduce unnecessary vibration.
Coaxiality requirements: The axis coaxiality of the power equipment, sensor and load equipment should meet the specified standards, usually less than Φ0.05mm.
Coupler selection: Choose the right coupler for your application, such as a flexible pin coupling or a rigid coupling.
Maintenance and calibration: Perform regular maintenance and calibration to ensure measurement accuracy and long-term stability of the sensor.

The above is a general installation guide for torque sensors. For specific installation steps and details, refer to our installation instructions.