SI-3109 is a large-diameter electromagnetic flow meter, an electronic flow meter suitable for large-diameter pipes, particularly for recycled water measurement.
Electromagnetic flow meters can be used as sewage flow meters for measuring water flow rates. For industrial wastewater treatment, an electromagnetic flow meter is your best choice, as we can select different materials for the electrodes and lining.

Diameter | DN200~DN2200mm |
Accuracy | ±0.5% |
Flow rate | 0.3~10m/s |
Electrode | 316L (Suitable for domestic water, industrial water, raw water, underground water, sewage, etc.; not applicable to acid and alkali salt) |
Lining material | Chloroprene rubber(CR), polyurethane rubber(PU) |
Features
Technical Parameters
Medium | Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc |
Diameter | DN200~DN2200mm |
Accuracy | ±0.5% |
Medium temperature | RS485, GPRS,Hart |
Nominal pressure | GB 0.6MPa (DN700~DN2000)GB 1.0MPa (DN200~DN600)GB 1.6MPa (DN6~DN150) |
DIN PN16,PN25,PN40,PN63 | |
JIS10K,20K,40K | |
ANSI Class150,Class300,Class600, others can be customized | |
Flow rate | 0.3~10m/s |
Straight pipe required | Upstream ≥5DN,downstream ≥3DN |
Electrode | 316L (Suitable for domestic water, industrial water, raw water, underground water, sewage, etc.; not applicable to acid and alkali salt) |
Lining material | Chloroprene rubber(CR), polyurethane rubber(PU) |
Installation way | Carbon steel flange (standard), Stainless steel flange(optional) |
Body material | Carbon steel (standard),Stainless steel(optional) |
Power supply | 220VAC/24VDC/lithium battery |
Signal output | Carbon steel (standard), Stainless steel(optional) |
Communication | Pulse and 4~20mA; (if use a lithium battery, without signal output) |
Explosion-proof | EXdeibmIICT3-T6 |
Protection proof | IP65 (compact type); IP67,IP68(suitable for remote type) |
Work environment | Ambient temperature:-20~+60℃,Ambient humidity:5%~90% |
Power | <20W |
Electrode material selection:
Material | Medium |
316L | Domestic water, industrial water, raw water, urban sewage, etc. |
Hastelloy B (HB) | Sodium hydroxide ammonium hydroxide alkali solution and weak organic acid |
Hastelloy C (HC) | Oxidizing salt solution (Fe+++, Cu++, seawater) |
Titanium (Ti) | 1. Salt solution (chloride, sodium salt, potassium salt, ammonium salt, sea water, etc.)2. Alkaline solution (such as concentration less than 50% potassium hydroxide solution) |
Tantalum(Ta) | 1. Hydrochloric acid, sulfuric acid, oxidizing acid, aqua regia2. Chlorine dioxide, ferric chloride, hypochlorous acid, sodium cyanide, lead acetate, etc. |
Platinum (Pt) | Acid, alkali, salt solution |
Tungsten carbide (WC) | Handled neutral industrial sewage and domestic sewage. Resistant to solid particle interference |
Lining material selection
Lining material | Linner | Temperature | Suitable medium | Diameter |
Rubber | Neoprene(CR) | -20~60℃ | Slurry, paper pulp, etc. | DN65~DN1600 |
Natural Rubber(NR) | ||||
Polyurethane Rubber(PU) | Tap water, industrial water, seawater | DN25~DN500 | ||
Silicone rubber | -20~180℃ | Water | DN40~DN1600 | |
Fluoroplastic | PTFE(F4) | -20~120℃ | Corrosive acid-base salt liquid | DN10~DN1600 |
Teflon F46(FEP) | -40~160℃ | Corrosive acid-base salt liquid | DN10~DN200 | |
PFA | -40~160℃ | Corrosive acid-base salt liquid | Tap water,industrial water, seawater |
Order Guide
SI-3109- | Note | ||||||||||||
Diameter | DNXX | DN6~DN2200(mm) | |||||||||||
Structure | F | Remote type (standard with 10m cable) | |||||||||||
Y | Compact type | ||||||||||||
Electrode | S | 316L | |||||||||||
T | Titanium(Ti) | ||||||||||||
D | Tantalum(Ta) | ||||||||||||
C | Hastalloy C(HC) | ||||||||||||
P | Platinum iridium alloy | ||||||||||||
Lining material | X | Chloroprene rubber (CR) Suitable for tap water, | |||||||||||
J | Polyurethane rubber (PU) Suitable for pulp, pulp, etc liquid | ||||||||||||
E | Polytetrafluoroethylene (PTFE) | ||||||||||||
A | PFA | ||||||||||||
Body material | CS | Carbon steel | |||||||||||
S4 | SUS304 | ||||||||||||
Protection class | L0 | IP65(compact type) | |||||||||||
L1 | IP67(remote type) | ||||||||||||
L2 | IP68(remote type) | ||||||||||||
Power supply | 1 | 110~240V AC | |||||||||||
2 | 24V DC | ||||||||||||
3 | Lithium battery(no signal output) | ||||||||||||
Signal output | N | No output | |||||||||||
N1 | 4-20m/pulse output | ||||||||||||
Communication | H | HART protocol | |||||||||||
R1 | MODBUS RS485 | ||||||||||||
G | GPRS | ||||||||||||
With grounding ring | 0 | Without grounding ring | |||||||||||
1 | With grounding ring | ||||||||||||
Nominal pressure | D1 | DIN PN16 | |||||||||||
D2 | DIN PN25 | ||||||||||||
D3 | DIN PN40 | ||||||||||||
D4 | DIN PN63 | ||||||||||||
J1 | JIS 10K | ||||||||||||
J2 | JIS 20K | ||||||||||||
J3 | JIS 40K | ||||||||||||
A1 | With a grounding ring | ||||||||||||
A2 | ANSI Class300 | ||||||||||||
A3 | ANSI Class600 | ||||||||||||
O | Others | ||||||||||||
Cable length | /xx | Unit: m |
Read more about: Magnetic Flowmeter Technology
Applications
Large-diameter electromagnetic flowmeters (typically those with diameters larger than DN200) are suitable for measuring large flows. Their primary advantages are low pressure loss and significant energy savings.
For high-flow applications such as water plant supply, municipal drainage, and circulating water measurement in large industrial enterprises, large-diameter flowmeters are the perfect choice.
Large-diameter flowmeters maintain excellent measurement performance even at low flow rates. However, special attention must be paid to installation conditions to ensure a consistent straight pipe length, typically 10D in front and 5D in the back (D represents the pipe diameter).
Application case:
- In sewage treatment plants, large-diameter electromagnetic flowmeters are used to measure sewage flow.
Sewage contains a large amount of solid particles and corrosive substances, necessitating a wear- and corrosion-resistant flowmeter. Furthermore, sewage treatment plants operate over a wide flow range, from a few cubic meters per hour to thousands of cubic meters per hour, necessitating a flowmeter with a wide turndown ratio.
Furthermore, the pipe system pressure in sewage treatment plants is typically low, so the flowmeter’s corrosion and wear resistance must be considered.
- In the chemical industry, large-diameter electromagnetic flowmeters are used to measure the flow of corrosive liquids such as acids and alkalis.
These liquids operate over a wide temperature and pressure range, necessitating a flowmeter that can withstand high temperatures, high pressures, and severe corrosion.
For example, when measuring the flow of concentrated sulfuric acid, the flowmeter’s electrodes and lining should be made of materials resistant to sulfuric acid corrosion, such as Hastelloy and polytetrafluoroethylene.