Kim GuoUltrasonic flow meters use ultrasonic technology to measure liquid flow. There are two main types: Doppler effect and transit time. Both Doppler Effect and Transit Time ultrasonic flowmeters can be equipped with external clamp or insert sensors. Suitable for measuring large pipe diameters and fluids that are not easily accessible. Doppler Effect and Transit Time … Read more
Doppler effect ultrasonic flow meters are specially designed for the measurement of liquids containing solid particles or bubbles with a lot of impurities or relatively dirty liquids. Can be configured with external clamp sensor or insert sensor. The external clamp sensor can be installed or removed without interrupting the production process. It does not come … Read more
Dual channel ultrasonic flow meter uses advanced ultrasonic flow/Heat measurement technology. Each channel can achieve measurement accuracy of ±1.0%. It can also be four-channel or multi-channel. The sound channels can be mutually redundant, greatly improving the accuracy and stability of the flow (heat) meter. It can effectively overcome the shortcomings of low accuracy and unstable … Read more
Ultrasonic Inline Flow Meter has both the host computer and the sensor installed on the measuring pipe. The protection level is high and can reach IP68. Paired with a temperature sensor, heat measurement can be achieved. It can be used for production monitoring, water balance debugging, heating network balance debugging, and energy saving monitoring. Ultrasonic … Read more
The doppler ultrasonic flow meter with insertion sensor is specially designed for measuring the flow of media such as liquids and slurries containing certain solid impurities and bubbles in closed pipes. The Insertion sensor effectively solves the problems of external clamp-on measurement that cannot be effectively measured due to scaling on the inner wall of … Read more
Clamp on doppler flow meter can measure the flow rate of liquids, slurries and other media containing certain solid impurities and bubbles in closed pipes. The sensor tube is installed outside and does not come into contact with the fluid. Therefore, it is not affected by pipeline dirt and blockage. There is no need to … Read more
TSL300 series radar level sensors use 80G high-frequency sensors. They have strong anti-interference properties. Can be used normally for foaming and stirring floating objects. The casing is made of plastic. The probe and circuit board are both developed and produced by our company. Provide you with the most cost-effective liquid level measurement solution! Features Radar … Read more
Ultrasonic Level Sensor Applications are very broad. The ultrasonic liquid level sensor uses ultrasonic pulse echo to achieve liquid level measurement. It can be widely used in liquid level-material level monitoring. The transducer (probe) of an ultrasonic level sensor emits high-frequency ultrasonic pulses. When it encounters the surface of the liquid level being measured, the … Read more
Diesel sensors can be used to measure the liquid level of diesel in storage tanks and convert it into standard electrical signals or switching signals. It can be used to build a diesel storage tank liquid level monitoring system. Sino-Inst supplies float, ultrasonic, radar and other various diesel level sensors. Supports customization of measuring range, … Read more
Differential pressure transmitters are transmitters that measure the difference in pressure across the transmitter. Output standard signals (such as 4~20mA, 0~5V). Differential pressure transmitters are mainly used to measure differential pressure, pressure and negative pressure of liquids, gases and steam. It is also possible to measure liquid levels in open or pressurized vessels. Equipped with … Read more