Strap on Flow Meter Model X3

Strap on flow meter X3 is also called Clamp On Type Flow Meter. X3 is very unique in structural design using circular magnetic steel. Automatic snap-fit during installation. It only takes 2-3 minutes from installation to measurement. It also uses the currently popular OLED display. Easily read in low-light environments.

X3 is widely used in production process flow measurement and monitoring. The application of the product can improve the yield rate of the product while continuously effectively and accurately controlling the flow of the fluid. Even save the input of personnel. Bring benefits to production enterprises.

RFQ

Features of Strap on Flow Meter Model X3

• The flow meter is stuck out of the pipe. No additional changes to the pipeline are required;
• Installation and measurement can be completed according to the operation guide without professional knowledge;
• No moving parts. No pressure loss. It can be installed and used without stopping production;
• OLED display: clear reading in dark environments
• Main menu and menu mode
  • Easy to switch display
  • Easy and quick setup
• Touch button
  • Easy to set up and enter
• Reliable aviation socket, simple wiring

Optional Types

Integrated Type Strap on Flow Meter

Pipe diameter: φ9.53~φ118 (DN6-DN100)
Temperature resistance 50 degrees

Split Type Strap on Flow Meter

Pipe diameter: φ9.53~φ228 (DN6-DN200)
Temperature resistance 50 degrees

High temperature type (split) Strap on Flow Meter

Pipe diameter: φ9.53~φ228 (DN6-DN200)
Temperature resistance 120 degrees

Anti-corrosion type (split) Strap on Flow Meter

Pipe diameter: φ9.53~φ63(DN6-DN50)
Temperature resistance 50 degrees
PP material sensor

Special type (split) Strap on Flow Meter

Pipe diameter: φ9.53, φ12.7(DN6, DN8)
Temperature resistance 50 degrees
PP material sensor
Dedicated to PFA and silicone tubing

Specifications

• Flow range: 0.1m/s~5.0m/s
• Accuracy: +/-2.0%
• Repeatability: 0.80%
• Measuring pipe diameter: φ9.53~φ228(DN6~DN200)
• Storage function: with daily, monthly and annual flow accumulation function
• Analog output: 4-20mA, maximum load 600Ω
• Alarm output: OCT upper and lower limit alarm function (option)
• Communication interface: RS485, support Modbus communication protocol
• Power supply: 24VDC
• Cable length: 2.0 meters, can be extended
• Keyboard: Four tactile keys
• Display: OLED 12864 dot matrix display Unit: Support metric and imperial unit selection1
• Accumulator: Six-digit flow accumulator
• Suitable pipe material: Steel (steel pipe), Copper (copper pipe), Plastic (plasticpipe)*2
• Shell material: aluminum alloy; anti-corrosion sensor is made of PP
• Ambient temperature: 0°C-50°C (32°F-122°F)
• Medium temperature:
  • Normal temperature type: 0°C-50°C (32°F-122F)
  • High temperature type: 0°C-120°C (32°F-248°F)
• Ambient humidity: 0-95% relative humidity, non-condensing
• Protection class: IP54

Note 1. Cubic Meters (m3), Liters (L), US Gallons (GAL), you can press /hour (hour), /min
(minute), the factory default unit is m3/h
Note 2. There are many kinds of plastic pipes, mainly PVC, PVDF, PPR, PFA, HDPE, etc.

Application Industry:

Since the X3 was put on the market, it has been widely used in the cleaning equipment industry. Due to its simple installation and operation, and reliable measurement performance, it has been continuously promoted in new industries.

Main industries: food, medicine, drinking water, washing supplies, printing and dyeing, chemical supplies, etc.

Suitable Medium

X3 almost meets different clean fluid measurements:

The main application is in the measurement and control of water (tap water, pure
water, ultrapure water). It is also well used for various acids, alkalis, wines, chemical solvents, alcohol, drinking water, etc.

Media measured with user feedback:
Sulfuric acid, white wine, hydrocarbons, alcohol, sodium chlorate, sodium carbonate, triethylammonia, ethylenediamine, propylene oxide, etc.

Judgment of the measurable medium: the flow rate of the medium in the pipeline is stable, and the pressure is kept at 0.3MPa. No air bubbles (or cavitation) due to flow or
pressure changes can be measured.

Strap on Flow Meter Model X3 Suitable Pipe Material

X3 can almost meet the measurement of different sound-conducting material pipes, including “metal pipe” and “plastic pipe”.

Through menu options, an X3 can measure both metal pipes and plastic pipes. Metal pipe: stainless steel pipe, carbon steel pipe, copper pipe

Plastic pipes: PVC/CPVC, PVDF, PPR, PPH, PFA/PU, HDPE, etc.

More Clamp-on Flow Meters

More Flow Measurement Solutions

Sino-Inst is a manufacturer and supplier of Strap on Flow Meter Model X3.

The Model X3 Strap on Flow Meter is stuck outside the pipe, and no additional changes to the pipe are required. Installation and measurement can be completed according to the operation guide without professional knowledge. There are no moving parts, no pressure loss, and it can be installed and used without stopping production.

We support customization of Strap on Flow Meter. Including high temperature type, split type, anti-corrosion type, wireless type, etc. If you need Strap on Flow Meter, please feel free to contact Sino-Inst. Our professional technical team will provide you with free technical support!

Strap on Flow Meter Model X3 | Easy and Quick Clamp on

Strap on flow meter X3 is also called Clamp On Type Flow Meter. X3 is very unique in structural design using circular magnetic steel. Automatic snap-fit during installation. It only takes 2-3 minutes from installation to measurement. It also uses the currently popular OLED display. Easily read in low-light environments.

Product SKU: Strap on Flow Meter Model X3

Product Brand: Sino-Inst

Product Currency: USD

Product Price: 685

Price Valid Until: 2029-09-09

Product In-Stock: InStock

Editor's Rating:
5