SI-3301 digital gas vortex flow meter is a flow meter operating with Karman Vortex principle for flow rate of gases (air, oxygen, nitrogen, coal gas, natural gas, chemical gas, etc.). It could be used in automatic control system as flow transmitter. Diameter DN15~DN1800 (mm) Accuracy Pipe type: Class 1.0 Insertion type: Class 2.5 Temp. range … Read more
Threaded installation is a common method for small-diameter turbine flow meters. The SI-3205 Threaded Connection Turbine Flow Meter offers high accuracy, typically ±1%R or ±0.5%R, with a high-precision model reaching ±0.2%R. Threaded installation is available for sizes from DN2 to DN100. Diameter DN2～DN100 Accuracy 0.5% or 1.0% of Reading Temp. range -200～+180℃ Pressure 1.6 MPa … Read more
Turbine flowmeters are available in a variety of mounting styles including threads, flanges, and tri clamps. Among them, the flange turbine flowmeter is the most common. The SI-3204 flange type turbine flowmeter: simple installation, convenient disassembly, high strength and good sealing performance. Diameter DN15-DN200 Accuracy Class 1.0, class 0.5 Temp. range -20～+150℃ Flange standard GB/T 9119-2010, … Read more
Sanitary turbine flow meter, also called tri clamp turbine flow meter. Made of 316ss or 304ss to meet the food grade. With pulse output, 4-20mA output, LCD display, Sanitary flow meter can show the flow rate. SI-3203 Sanitary Turbine Flow Meter is a flow meter applied in industries: pharmaceutical, food, beverage for measurement, batching, control, … Read more
Liquid turbine flow meters utilize the mechanical energy of liquids to rotate a rotor within the fluid, measuring the rotational speed and thus the fluid flow rate. They are suitable for measuring the volumetric flow of low-viscosity liquids in closed pipes, such as water, diesel, hydrocarbons, and chemicals. Sino-Inst’s liquid turbine flow meters utilize proven … Read more
SI-3111 Weir trough type Open Channel Electromagnetic Flow Meter,is an open channel measurement flow system,that consists of a flow display meter, a flow meter, and a liquid level meter. The open channel flow measurement system,is widely used for flow measurement of rectangular, trapezoidal open channels and culverts. Such as reservoirs, rivers, water conservancy projects, urban water … Read more
The core components of a SI-3108 Stainless Steel Electromagnetic Flow Meter are made of stainless steel, featuring corrosion resistance, high pressure resistance, and a long service life. Typical applications: Measurement of corrosive/hygienic fluids (such as acids, alkalis, slurries, and pure water) in industries such as chemical, pharmaceutical, food, water treatment, and petroleum. Features The SI-3108 … Read more
The Magnetic Water Flow Meter is suitable for measuring various aqueous solutions with a conductivity greater than 5μs/cm. These include domestic water, industrial water, raw water, groundwater, municipal sewage, industrial wastewater, treated neutral pulp, and pulp slurry. Based on Faraday’s law of electromagnetic induction, electromagnetic flowmeters can measure water flow rate, flow velocity, and accumulated … Read more
Electromagnetic flow meters measure the volumetric flow of conductive liquids in closed pipes. Electromagnetic water flow meters are the preferred process water flow meter. Most industrial water supply pipes (1-inch, 3-inch, etc.) require online flow measurement. They display instantaneous flow in real time, provide totalizer flow, and support pulse, 4-20mA, and RS485 signal outputs. Electromagnetic … Read more
An insertion magnetic flow meter is a flow meter based on Faraday’s law of electromagnetic induction. It is primarily used to measure the volumetric flow rate of conductive liquids in large-diameter closed pipes. It can be installed under pressure, allowing installation without shutting off the water supply. This provides a novel method for measuring and … Read more