SI-3105 Battery Powered Magnetic Flowmeter

Battery operated flow meter, also called battery powered electromagnetic flowmeter. Battery operated flow meter, is the magnetic flow meter, that can be used as the water meter, drinking water, and others flow rate of liquids.

SI-3105 Battery Powered Magnetic Flowmeter,

is a battery powered electromagnetic flow meter mainly used in water applications.

The SI-3105 display/converter module is equipped with a replaceable lithium battery,

that can be used for up to three years of continuous operation.

The operation period can be extended by using a high-capacity battery,

instead of our standard lithium battery.

Diameter	DN10~DN2200(mm)
Accuracy	0.5% to 2.0% of reading
Temp. range	-20～+150℃
Pressure	1.6 MPa
Flow rate	0.5～6m/s
Liners:	Chloroprene rubber(CR), polyurethane rubber(PU), PTFE (optional)

Features

High accuracy down to 0.2% of rate
Long lasting performance
6 years operation in typical revenue applications
No moving parts that wear and tear
Bi-directional flow measurement over a wide dynamic range
Unique rectangular sensor design for good low flow performance
Available with patented reference electrode: no grounding rings needed
Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
Suitable for immersion in flooded chambers
Battery-powered for remote locations or mains powered with battery backup

Specifications

Medium	Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc
Diameter	DN10~DN2200mm
Accuracy	±0.5%
Medium temperature	<60℃
Nominal pressure	GB 0.6MPa (DN700~DN2000)GB 1.0MPa (DN200~DN600)GB 1.6MPa (DN6~DN150)
	DIN PN16,PN25,PN40,PN63
	JIS10K,20K,40K
	ANSI Class150,Class300,Class600, others can be customized
Flow rate	0.3~10m/s
Straight pipe required	Upstream ≥5DN,downstream ≥3DN
Electrode	316L (Suitable for domestic water, industrial water, raw water, underground water, sewage, etc.; not applicable to acid and alkali salt)
Lining material	Chloroprene rubber(CR), polyurethane rubber(PU)
Installation way	Carbon steel flange (standard), Stainless steel flange(optional)
Body material	Carbon steel (standard),Stainless steel(optional)
Power supply	220VAC/24VDC/lithium battery
Signal output	Pulse and 4~20mA; (if use lithium battery, without signal output)
Communication	RS485,GPRS,Hart
Explosion-proof	EXdeibmIICT3-T6
Protection proof	IP65 (compact type); IP67,IP68(suitable for remote type)
Work environment	Ambient temperature:-20~+60℃,Ambient humidity:5%~90%
Power	<20W