- This product is an integrated product that uses resistance strain as a sensitive element and an integrated circuit.
- It has high precision, stable and reliable performance, and a wide measurement range.
- Static torque measurement. One end is connected by a key (or inner square key), and the other end is connected by a flange.
- It can measure torque values in both positive and negative directions.
- Medium and low range torque measurement, easy to install and use.
- Widely used in static torque measurement.
CL1-22 Flange to Key Static Torque Transducer Technical Parameters
| Range | 50,100, 200,300, 500,1000-10000Nm |
| Output | 1.5mV/V±10%F.S. |
| Accuracy | ±0.1，±0.2%FS. |
| Zero temperature effect | ±0.05%F.S. |
| Full temperature effect | ±0.05%F.S. |
| Compensated temperature range | -10~60℃ |
| Operating temperature range | -20~75℃ |
| Supply voltage | 5-10VDC |
| Input resistance | 350±20Ω |
| Output resistance | 350±10Ω |
| Response frequency | 100μS |
| Insulation resistance | ≥2000MΩ/100VDC |
| Safety overload | 150%F.S |
| Ultimate overload | 200%F.S. |
| Cable size | Φ5×3m |
| Material | Shaft material 17-4PH stainless steel, alloy steel, housing is aluminum |
| Electrical connection | Red/E+, black/E-, green/S+, white/S- |
Dimensions
| Model | Range/Nm | A | B | C | D | E | F | K | L | N | S | P | M |
| CL1-22A | 0-1000 | 99 | 50 | 80 | 155 | 20 | 65 | 53 | 25 | 16 | 20 | 44 | 4-φ10.5 |
| CL1-22B | 0-1000 | 98 | 50 | 80 | 90 | 15 | 33 | 33 | 25 | 16 | 20 | 44 | 4-φ10.5 |
| CL1-22C | 1500-2000 | 125 | 75 | 105 | 150 | 20 | 62 | 60 | 30 | 20 | 25.5 | 67.5 | 8-φ12.5 |
| CL1-23D | 2500-5000 | 125 | 75 | 105 | 150 | 20 | 62 | 60 | 30 | 20 | 40.5 | 67.5 | 8-φ12.5 |
| CL1-24E | 6000-10000 | 190 | 98 | 160 | 220 | 30 | 120 | 110 | 70 | 2-28 | 55 | 78 | 8-φ19 |
The difference between dynamic torque and static torque
Dynamic torque: It is the torque displayed in real-time by the tool or equipment during the assembly process. It is the torque achieved by the bolt overcoming dynamic friction. The torque value pre-set by the general torque-fixed tool and tightening machine is also the dynamic torque value.
Static torque: After the tightened bolt stops, the maximum torque achieved by continuing to overcome static friction in the tightening direction is the static torque. Generally, the peak torque measured by the pointer-type manual wrench is the static torque.
In the actual assembly process, it is very important to distinguish between dynamic torque and static torque, which is related to the final assembly effect of the product. When considering the assembly process, many factories list dynamic torque and static torque separately, so as to test the final torque for different tools and departments.
Generally, in assembly factories, dynamic torque is used when assembling with power tools. The torque set on the torque-fixed tool and tightening machine is the dynamic torque. The torque measured when inspected with a pointer wrench is the static torque. Static torque is generally the basis for the quality inspection department to inspect the assembly quality.
More Torque Transducers and Solutions
Flange to Key Static Torque transducers are widely used in various fields, such as machinery manufacturing, aerospace, automobile, chemical, oil, and gas industries. They are used to measure the torque of rotating machinery, such as engines, drive shafts, wind turbines, etc.
Sino-Inst can be customized according to the individual needs of customers. Including but not limited to size, flange, circuit, accuracy, software, etc. Flexible solutions, fast delivery. Even small batches can be customized. If you want to know about related products, please contact us.
Wu Peng, born in 1980, is a highly respected and accomplished male engineer with extensive experience in the field of automation. With over 20 years of industry experience, Wu has made significant contributions to both academia and engineering projects.
Throughout his career, Wu Peng has participated in numerous national and international engineering projects. Some of his most notable projects include the development of an intelligent control system for oil refineries, the design of a cutting-edge distributed control system for petrochemical plants, and the optimization of control algorithms for natural gas pipelines.
CL1-22 Flange to Key Static Torque transducer | Sino-Inst
Flange to Key Static Torque transducers are widely used in various fields, such as machinery manufacturing, aerospace, automobile, chemical, oil, and gas industries. They are used to measure the torque of rotating machinery, such as engines, drive shafts, wind turbines, etc.
Product SKU: CL1-22 Flange to Key Static Torque transducer
Product Brand: Sino-Inst
Product Currency: USD
Price Valid Until: 2029-09-09
Product In-Stock: InStock
5