DC-S030 Series Digital Communication Thermal Gas Mass Flow Controller / Mass Flow Meter
DC-S030 series digital communication thermal gas mass flow controller/mass flow meter is mainly used to measure 5 ml/min to 50 liters/min thermal gas mass flow controller or thermal gas mass flow meter.
Working pressure range can reach: 10MPa (100Bar). The product adopts a fully digital architecture and a new sensor manufacturing process. The communication mode is compatible with: 0-5V, 4-20mA, and RS485 communication modes. One-key switching communication signal, simple and convenient operation.
Features
- Normal working pressure range can reach: 10MPa (100Bar).
- The product accuracy is better than ±1%F.S, the response speed is better than 2 seconds and the flow value stabilization speed is also very fast.
- The communication mode is compatible with: 0-5V, 4-20mA, and RS485 communication mode. One-key switching communication signal, simple and convenient operation.
- The valve body flow material is made of high-quality 316L stainless steel.
- The power supply mode is a 15V-24V broadband power supply, which can meet the use requirements and usage habits of most users on the market.
- The DB9 pin electrical connector is also convenient for users to disassemble and assemble during use.
- It has the advantages of fast response speed, high accuracy, stable flow control, wide pressure range, excellent corrosion resistance, and excellent linearity.
- It can monitor and control various inert gases and some corrosive gases.
DC-S030 Series Digital Communication Thermal Gas Mass Flow Controller / Mass Flow Meter technical parameters
| RS485 Modbus protocol | Mass flow controller / Mass flow meter |
| Product model | DC-S030C/DC-S030M |
| Full scale | 5SCCM–30SLM |
| Measurement and control range | 2%-100%F.S; 1%-100%F.5 |
| Flow accuracy | ≤±1.0%F.S |
| Linear accuracy | ≤±0.5%F.S |
| Repeatability accuracy | ±0.2%F.S |
| Valve type | Normal closed |
| Valve body material | Stainless steel 316L |
| Response time | ≤5s |
| Product pressure resistance | 3MPa, 10MPa |
| Communication signal | Fluororubber, perfluoro ether rubber |
| Power supply method | 15V-24V(300mA) |
| Leakage rate | 1×10-9atm.cc/sec He |
| Ambient temperature | 5-45℃ |
| Ambient humidity | 5-95%RH |
| Seal material | Fluororubber, perfluoroether rubber |
| Product weight | About 1.0-1.5kg |
| Product size | About 70×30×110(mm) |
| Installation method | Any position |
| Electrical interface | DB9 pin |
| Connector size | 1/4, 1/8, 1/2, 6mm, 8mm.… |
Gas mass flow controllers are usually calibrated with nitrogen (2) before leaving the factory.
Mass flow units: SCCM (standard milliliters per minute), SLM (standard liters per minute)
Standard conditions: temperature -293.15K (20°C), pressure -101325Pa (760mmHg)
F.S (Full Scale) means full scale
Application of DC-S030C series thermal gas mass flow controller in welding robot
With the rapid development of industrial technology, various gases are widely used in the welding industry. Improving welding quality, shortening welding time, and saving labor and material costs are the focus of major companies in the welding industry.
Welding gases can be divided into the following according to the welding method:
- Gases used for gas welding include oxygen and acetylene;
- Shielding gases used for argon arc welding include argon or helium;
- Carbon dioxide gas for carbon dioxide gas shielding welding.
It is imperative to realize welding automation, so what benefits can robot welding automation bring to our company? Robot welding can improve production efficiency, robot welding can improve product quality, robot welding can reduce enterprise costs, robot welding can shorten the product modification cycle, and the corresponding equipment investment.
The DC-S030C series thermal gas mass flow controller produced and sold by Sino-Inst is mainly used for precise measurement and control of gas mass flow. It can accurately control the gas output. It can adjust and control the actual flow and concentration required by various gases through calculation, so as to achieve efficient and accurate use of various gases.
More Gas flow measurement and control solutions
- A Comparative Analysis Of Vertical And Horizontal Flow Meters
- LPG Gas Flow Meters With Some Prominent Manufacturers And Suppliers
- Grease And Lube Flow Meters
- Frame Of Flow Meters: Stainless Steel And PTFE Flow Meters
- Sewer Flow Meters and Their Importance in Sewer Monitoring
Sino-Inst’s DC-S030 series digital communication thermal gas mass flow controller/mass flow meter can be directly benchmarked against other brands. The maximum pressure resistance of the product can reach 10Mpa, and it adopts a new sensor manufacturing process.
Suitable for most dry and clean gases (and a few corrosive gases). Widely used in petrochemical, university laboratories, research institutes, aerospace, food manufacturing, pharmaceutical manufacturing, thermal power, nuclear power, natural gas filling stations, semiconductors, solar energy, LCD panel manufacturing and other industries.
According to different measurement conditions, we support the customization of parameters such as pressure, interface, material, signal output, etc. If you need to purchase a mass flow controller, please feel free to contact our sales engineer!
Zhang Wei, possesses 20 years of experience as an automation instrumentation engineer, specializing in the research, design, installation, commissioning, and maintenance of automation instruments.
Face to various instrument communication protocols (such as Modbus, Profibus, etc.), with solid hardware circuit design and software programming skills (proficient in C language and PLC programming). Has extensive project experience; projects he has led and participated in have all achieved outstanding results, improving product accuracy, reducing costs, and increasing production efficiency.
Possesses excellent communication and coordination skills and a strong team spirit, enabling him to quickly respond to customer needs and provide high-quality automation instrumentation solutions.
Digital Communication Thermal Gas Mass Flow Controller
DC-S030 series digital communication thermal gas mass flow controller/mass flow meter is mainly used to measure 5 ml/min to 50 liters/min thermal gas mass flow controller or thermal gas mass flow meter.
Product SKU: DC-S030 Series Digital Communication Thermal Gas Mass Flow Controller / Mass Flow Meter
Product Brand: Sino-Inst
Product Currency: USD
Product In-Stock: PreOrder
5