Home > Coriolis Mass Flow Meter Sizing Tool
Coriolis Mass Flow Meter Sizing Tool
When selecting a mass flow meter, consumers are generally concerned about accuracy, pressure drop, and flow rate. Therefore, we have created an online tool on this page. Users can enter their measurement parameters to obtain detailed information.
Coriolis Mass Flow Meter Sizing Tool CMF PRO
Smart process-parameter analysis & fluid selection calculator for Coriolis mass flow measurement
Real-Time Accuracy
Calculates measurement accuracy at each flow point including zero-stability correction at low flow rates.
Fluid Velocity
Estimates flow velocity inside the sensor tube to verify it stays within the safe range (≤10 m/s liquid, ≤60 m/s gas).
Pressure Drop
Predicts permanent pressure loss across the meter, with gas compressibility correction for compressible media.
Reynolds Number
Computes Reynolds number to characterize flow regime (laminar / transitional / turbulent) and verify meter suitability.
How it works: Enter your basic parameters (model, target accuracy, flow, density, viscosity) on the left, then optionally fill in process data (min/normal/max for pressure, temperature, etc.) on the right. Click RUN SIZING CALCULATION to generate a 10%–100% flow performance table with color-coded warnings and instantly verify whether the selected CMF model fits your application.
Basic Parameters
Project Information click to expand ▾
Process Data (Min / Normal / Max)
Parameter
Min
Normal
Max
Unit
Flow
Pressure
Temperature
Density
Viscosity
P-drop limit
Sizing Results
Enter parameters and click RUN SIZING CALCULATION to generate the result table.
Featured Mass Flow Meters
As a manufacturer of mass flow meters, Sino-Inst supports customized measurement parameters, including high pressure, low temperature, high temperature, and special materials. You can also contact us directly for customized solutions.