CL1-17 Shaft-Type Reaction Torque Transducer

CL1-17 Shaft-Type Reaction Torque Transducer

CL1-17 shaft-type reaction torque transducer is widely used in static torque test systems such as testing machines, torque wrenches, steering gears, bearings, electric actuators, valves, hydraulics, etc. It is favored by users due to its excellent stability, high measurement accuracy and extremely high cost performance. It is suitable for high-range torque measurement, and the range can be customized.

Features

  • High-range torque measurement;
  • Static torque measurement, both ends are keyed, easy to install and use;
  • Static torque can be continuously measured without repeated zeroing;
  • The strain elastic body is strong and can withstand 150% load;
  • Strong anti-interference, can be installed vertically and horizontally;
  • Suitable for detecting the torque value of non-rotating bodies. The maximum deflection angle is ≯360°;
  • It can enter the working state when turned on, without the need for a preheating process;
  • It can continuously measure the positive and negative torque without repeated zeroing;
  • The sensor can be used independently from the secondary instrument. Just provide a +24V power supply according to the socket pin number. Output impedance is proportional to the torque current, voltage, or frequency signal.

CL1-17 Shaft-Type Reaction Torque Transducer Technical Parameters

Range0.03-100,200,300,500,1-5K,10-20KNm, 30KN.m, 40KN.m, 60KN.m, 100KN.m can be customized, special range can be customized.
Output1.5mV/V±10%F.S.
Accuracy±0.1,±0.2%F.S.
Zero temperature effect±0.03%F.S.
Full temperature effect±0.03%F.S.
Compensated temperature range-10~60℃
Operating temperature range-20~75℃
Supply voltage5-10VDC
Input resistance350±20Ω
Output resistance350±10Ω
Response frequency100μS
Insulation resistance≥2000MΩ/100VDC
Safety overload150%F.S
Ultimate overload200%F.S.
Cable sizeΦ5×3m
MaterialShaft material 17-4PH stainless steel, alloy steel, housing is aluminum
Electrical connectionRed/E+, black/E-, green/S+, white/S-
Reaction torque transducer large range

Dimensions

CL1-17 Shaft-Type Reaction Torque Transducer Dimensions
Range NmφdABCEφFKey b*h*L*n
0.03-0.056654878.532
0.1-5885481718.532
10-151085481718.532
10-10018110463032516*6*22*1
200-500281305038406610*8*30*1
1000502106668729716*10*53*1
2000-5000703028610010811220*12*80*1
10000-2000011040010014015017332*18*110*2

How does a reaction torque sensor work?

Static torque sensors usually consist of a pair of elastic elements, strain gauges, circuit boards and signal processors.

The working principle of static torque sensors is based on the strain-stress relationship of materials.

The strain gauge is fixed to the surface of the material being tested. When the material is twisted, the strain gauge will undergo a slight deformation. These tiny deformations cause the resistance of the strain gauge to change, and the amount of change in resistance is proportional to the torque.

Therefore, by measuring the change in resistance, the torque can be calculated. When a torque acts on a shaft, the shaft will deform slightly. These tiny deformations will cause the strain gauge to deform, causing the resistance inside it to change.

More Torque Transducers and Solutions

The shaft-type reaction torque transducer is designed for online static or semi-rotary torque measurement. The high accuracy is ideal for calibration, development, and testing applications. The shaft-type torque transducer/reaction torque transducer series has a parallel shaft connection for online direct drive measurement. Applications include testing of electric motors, hydraulic pumps, automotive transmissions, steering systems, and aircraft actuators.

Sino-Inst reaction torque transducers are available with mV/V output signals or analog signals. Digital display meters, signal conditioners, and digital converters can be input to provide a complete torque measurement system.

We are able to provide miniature reaction torque transducers with custom shaft sizes and configurations. If you need, please feel free to contact our sales engineers!

    Request For Quote



    CL1-17 Shaft-Type Reaction Torque Transducer | Sino-Inst

    CL1-17 shaft-type reaction torque transducer is widely used in static torque test systems such as testing machines, torque wrenches, steering gears, bearings, electric actuators, valves, hydraulics, etc. It is favored by users due to its excellent stability, high measurement accuracy and extremely high cost performance. It is suitable for high-range torque measurement, and the range can be customized.

    Product SKU: CL1-17 Shaft-Type Reaction Torque Transducer

    Product Brand: Sino-Inst

    Product Currency: USD

    Price Valid Until: 2029-09-09

    Product In-Stock: InStock

    Editor's Rating:
    5