SI-3108 Stainless Steel Electromagnetic Flow Meter, is the flow meter that made of stainless steel material.
Corrosion resistance stainless steel electromagnetic flow meter.
| Diameter | DN6～DN2200mm |
| Accuracy | 0.5% to 2.0% of reading |
| Temp. range | -20～+150℃ |
| Flow rate | 0.3～10m/s |
| Electrode | 316,HastalloyB(HB),HastalloyC(HC), Titanium(Ti),Tantalum(Ta),Platinum(Pt) |
| Protection proof | IP65(compact type),IP67, IP68(suitable for remote type) |
SI-3108 Stainless Steel Electromagnetic Flow Meter,
The flanged electromagnetic flowmeter for use in volumetric measurement of conductive fluid,
like municipal or industrial water and waste water applications，
in which propeller meters have typically been used in the past.
- Virtually no pressure loss
- Suitable to meter for wide range of conductive liquid media
- No Moving Parts
- Flanges port connection
- RS485 Standard
- Suitable for Pipes diameter p to 2000 mm
- Large meter ratio
- High Accuracy
- 4 to 20 mA / Frequency / Pulse output
SI-3108 Stainless Steel Electromagnetic Flow Meter | |
| Medium | Acid, alkali, salt and other corrosive medium in chemical industry |
| Diameter | DN6～DN2200mm |
| Accuracy | ±0.5% |
| Medium temperature | ＜60℃ |
| Nominal pressure | GB 0.6MPa (DN700～DN2200) |
| GB 1.0MPa (DN200～DN600) | |
| GB 1.6MPa (DN6～DN150) | |
| DIN PN16,PN25,PN40,PN63 | |
| JIS10K,20K,40K | |
| ANSI Class150,Class300,Class600, others can be customized | |
| Flow rate | 0.3～10m/s |
| Straight pipe required | Upstream ≥5DN，downstream ≥3DN |
| Electrode | HastalloyB(HB),HastalloyC(HC),Titanium(Ti),Tantalum(Ta),Platinum(Pt), |
| Tungsten carbide(WC) (For acid and alkali salt solution) | |
| Installation way | Carbon steel flange (standard), Stainless steel flange(optional) |
| Body material | Carbon steel (standard),Stainless steel(optional) |
| Power supply | 220VAC/24VDC/lithium battery |
| Signal output | Pulse and 4～20mA;(if use lithium battery, without signal output) |
| Communication | RS485,GPRS,Hart |
| Explosion-proof | No |
| Protection proof | IP65(compact type),IP67,IP68(suitable for remote type) |
| Work environment | Ambient temperature：-20～+60℃，Ambient humidity：5%～90% |
| Power | ＜20W |
Electrode material selection:
| Material | Medium |
| 316L | Domestic water, industrial water, raw water, urban sewage, etc. |
| Hastelloy B (HB) | Sodium hydroxide ammonium hydroxide alkali solution and weak organic acid |
| Hastelloy C (HC) | Oxidizing salt solution (Fe+++, Cu++, seawater) |
| Titanium (Ti) | 1. Salt solution (chloride, sodium salt, potassium salt, ammonium salt, sea water, etc.) 2. Alkaline solution (such as concentration less than 50% potassium hydroxide solution) |
Tantalum(Ta) | 1. Hydrochloric acid, sulfuric acid, oxidizing acid, aqua regia 2. Chlorine dioxide, ferric chloride, hypochlorous acid, sodium cyanide, lead acetate, etc. |
| Platinum (Pt) | Acid, alkali, salt solution |
| Tungsten carbide (WC) | Handled neutral industrial sewage and domestic sewage. Resistant to solid particle interference |
Lining material selection
Lining material | Linner | Temperature | Suitable medium | Diameter |
Rubber | Neoprene(CR) | -20~60℃ | Tap water,industrial water,seawater | DN65~DN1600 |
| Natural Rubber(NR) | ||||
| Polyurethane Rubber(PU) | Slurry, paper pulp etc. | DN25~DN500 | ||
| Silicone rubber | -20~180℃ | Water | DN40~DN1600 | |
Fluoroplastic | PTFE(F4) | -20~120℃ | Corrosive acid-base salt liquid | DN10~DN1600 |
Teflon F46(FEP) | -40~160℃ | Corrosive acid-base salt liquid | DN10~DN200 | |
| PFA | -40~160℃ | Corrosive acid-base salt liquid | DN10~DN300 |
In addition to regular products, we support customization
| SI-3108- | Note | |||||||||||||
| Diameter | DNXX | DN6~DN2200(mm) | ||||||||||||
| Structure | F | Remote type (standard with 10m cable) | ||||||||||||
| Y | Compact type | |||||||||||||
| Electrode | S | 316L | ||||||||||||
| T | Titanium(Ti) | |||||||||||||
| D | Tantalum(Ta) | |||||||||||||
| C | Hastalloy C(HC) | |||||||||||||
| P | Platinum iridium alloy | |||||||||||||
| Lining material | X | Chloroprene rubber (CR) Suitable for tap water, | ||||||||||||
| industrial water, sea water, etc liquid | ||||||||||||||
| J | Polyurethane rubber (PU) Suitable for pulp, pulp, etc liquid | |||||||||||||
| E | Polytetrafluoroethylene (PTFE) | |||||||||||||
| A | PFA | |||||||||||||
| Body material | CS | Carbon steel | ||||||||||||
| S4 | SUS304 | |||||||||||||
| Protection class | L0 | IP65(compact type) | ||||||||||||
| L1 | IP67(remote type) | |||||||||||||
| L2 | IP68(remote type) | |||||||||||||
| Power supply | 1 | 110~240V AC | ||||||||||||
| 2 | 24V DC | |||||||||||||
| 3 | Lithium battery(no signal output) | |||||||||||||
| Signal output | N | No output | ||||||||||||
| N1 | 4-20m/pulse output | |||||||||||||
| Communication | H | HART protocol | ||||||||||||
| R1 | MODBUS RS485 | |||||||||||||
| G | GPRS | |||||||||||||
| With grounding ring | 0 | Without grounding ring | ||||||||||||
| 1 | With grounding ring | |||||||||||||
| Nominal pressure | D1 | DIN PN16 | ||||||||||||
| D2 | DIN PN25 | |||||||||||||
| D3 | DIN PN40 | |||||||||||||
| D4 | DIN PN63 | |||||||||||||
| J1 | JIS 10K | |||||||||||||
| J2 | JIS 20K | |||||||||||||
| J3 | JIS 40K | |||||||||||||
| A1 | ANSI Class150 | |||||||||||||
| A2 | ANSI Class300 | |||||||||||||
| A3 | ANSI Class600 | |||||||||||||
| O | Others | |||||||||||||
| Cable length | /xxx | Unit: m | ||||||||||||
SI-3108 Stainless Steel Electromagnetic Flow Meter
Applicable metering liquid:
- Conductive liquid media, conductivity > 5 µS/ cm
- Various Conductive aqueous solutions, water solutions, acid & caustics
- Abrasive slurries, sludges and grease bearing liquids, corrosive liquid, municipal tap water, waste water,dirty
water, effluent, fibrous, viscous, paper mill, food & beverage
John
Thanks for your technical support!
Techincal Support
Related Products
